The above table was prepared at an early date in the vehicle’s life before data on vehicular spare parts, etc. was finalized. The spare parts usually issued with the 3/4 ton Dodge are listed below. In early vehicles, the spares were carried in a bag under the seat whereas in later vehicles, there was a spare parts drawer fitted to the firewall under the passenger’s side of the dash.

• A - 1 Belt, fan
• B - 1 Lamp unit, blackout stop, sealed, one opening, 6-8 V, 3-cp (8-L-421)
• C - 1 Lamp unit, service tail and stop, sealed, 6-8 V, (8-L-419)
• D - 1 Lamp unit, blackout tail, sealed, four opening, 6-8 V, 3-cp (8-L-415)
• E - 1 Wire, iron, annealed, 22-gauge, 1/4 lb, (22-W-1067)
• F - 1 Lamp, electric, incandescent, miniature, 6-8 V, Sing-tung-fil., 3-cp (MZ63) (17-L-5215)
• G - 1 Spark plug, with gasket, 14mm. (17-P-5355)
• H - 5 Cores, tire, valve (boxed) Schrader No. 4000 or equal. (8-C-6750)
• J - 5 Caps, tire, valve (boxed) Schrader No. 6300 or equal. (8-C-650)
• K - 1 Tape, friction, black, grade A, 3/4-in. 8-oz roll, (17-T-805)
• L - 1 Pin, cotter, split-steel, assorted, (boxed), (41-P-5347)
• (Not Illustrated) 4 Pins, shear (Winch veh/s. only) CC-915850 (early) CC-1088128 (late)